Product Description Product Specs/Additional Information Related Videos Audio Product Description The Two Notes OPUS is the ultimate pedal platform for amplifier simulations and dynamic impulse responses powered by tube-stage modelling technology, all in a compact & ultra-portable rugged metal chassis. The pedal comes with 5 pristine TSM (tube stage modelling) preamp emulations, with 10 total slots for future preamp models via free firmware updates.Use the MIDI input for seamless assimilation into existing set-ups, with the included MIDI breakout cable. The pedal has USB-C connectivity for quickly transferring your data.The OPUS now comes with three additional Preamps when registering! Enjoy the new AVIATOR, Tanger and eldorado. All you need to do is connect the OPUS to your desktop, and the Torpedo Remote program and accept the firmware update prompt.SimulationsExquisite TSM Power amp simulation with 4 tube amp models (6L6, EL34, EL84 and KT88), Pentode / Triode, Push-Pull (PP) ‘Class AB’, or Single Ended (SE) ‘Class A’ power ampsOn-board DynIR Engine for class-leading cabinet simulation with dual-miking facilities, 8 microphones per cabinet and 12 room emulationsPro-grade suite of essential DSP-powered processors and effects including an EQ, Enhancer, Noise Gate and ReverbDual Static IR Loader and Acoustic DI with 40 premier Acoustic Impulse Responses included.Pre-Loaded Cabinet SimulationsPre-loaded with the OPUS-Series DynIR Cabinet Collection featuring 32 Cabinets including captures from Steve Stevens, Dave Friedman, Pete Thorn, George Lynch and Phil X.Preset LocationsThe pedal has 99 preset locations and an exclusive collection of 40 artist-series presets from the likes of Pete Thorn, Michael Nielsen, Jack Gardiner, Tom Quayle, Adam Steel, John Browne, Jay Leonard Jay and many more!Wireless Integration with the Torpedo Remote AppWireless Bluetooth and USB integration with Torpedo Remote (iOS, Android, MacOS, Windows) for expert-level tone shaping, preset management and real-time auditioning of 500 DynIR Cabinets. Product Specs/Additional Information Amp/Inst/Line Input: 1/4″ jack unbalanced (TRS)Input Impedance: AMP :160kΩ unbalanced / 300kΩ balanced LINE : 37kΩ unbalanced / 55kΩ balanced INST. : 1MΩ unbalancedMax Level (No Input Pad): AMP: 26.1dBu LINE: 11.3dBu INST.: 2.8dBuMax Level (With Input Pad): AMP: 36.2dBu LINE: 20.8dBu INST.: 12.3dBuMax Admissible Power For Amplifier Connection: “IN LEVEL” Switch Set To “AMP”“TO SPEAKER” output connected to a speaker rated at 16Ω No input pad: 15.2W With input pad: 100W“TO SPEAKER” output connected to a speaker rated at 8Ω No input pad: 30.3W With input pad: 100W“TO SPEAKER” output connected to a speaker rated at 4Ω No input pad: 60.5W With input pad: 100WAux In: 1/8″ (3.5mm) TRS jack Input Impedance: 29kΩTO SPEAKER Output*: 1/4″ Jack balanced (TS) *Unprocessed, unbufferedDI Output*: XLR balanced Max level: 10dBu Output Impedance: 600Ω *Protected against 48V phantom powerLine Output*: 1/4″ (6.35mm) TRS jack Max level: 10dBu Output Impedance: 600Ω *Not Protected against 48V phantom powerHeadphone Output*: 1/8″ (3.5mm) TRS jack Max output power: 300mW under 100Ω Output impedance: 33Ω USB Connector: USB-C 2.0MemoryDynIR Capacity: 64 DynIRMemory Card: 256Mb Micro-SD included Up to 32Gb cards supportedDigital AudioAD/DA Converters: Studio-grade 24-bit / 96 kHzBandwidth (-1dB): 30 Hz – 19 kHzDynamic Range ratio: 101dBInternal Processing: 32-bit floating-pointLatency: 2.2 ms (Line Input to Line Output)PowerPower input connector:Connector: 2.1mm x 5.5mm Polarity: Center negative Voltage: 12V DC Current: 200mA Power consumption: approx. 2WSupplied adapter:Connector: 2.1mm x 5.5mm Polarity: Center negative Input Voltage: 100-240V AC , 50-60Hz Output Voltage: 12Vdc Max. Current: 2000 mA Related Videos Audio
