Herringbone floor Oak Crema beveled brushed oiled

Description Herringbone floor Oak Crema Grade: Featuring a lively and light rustical character with texture and color tone variations, as well as natural knots. Smaller filled cracks and knots are allowed.   The total thickness of this herringbone floor is 14 mm, with a 2.5 mm thick noble oak layer, allowing it to be sanded up to two times. The edges are micro-beveled on all four sides, emphasizing the larger format of the planks. The surface is brushed, enhancing the natural and elegant pattern of the wood. This herringbone flooring is finished with natural oil, highlighting the wood’s beautiful and lively tone. The Crema grade, with filled knots, cracks, and natural tone variations, accentuates the authentic beauty of oak wood.   With a thermal resistance of approximately 0.1 m²K/W, this herringbone floor is suitable for installation over underfloor heating, provided the installation is done correctly, and the manufacturer’s guidelines are followed. The maximum permitted surface temperature is 29 °C. However, for optimal performance, it is recommended that the surface temperature does not exceed 25 °C.   This herringbone floor can be installed using either a floating method or by gluing it directly to the subfloor. Floating installation of herringbone floor is simpler and faster solution compared to glued installations. The planks lock together with a click connection, eliminating the need for full-surface gluing. For floating installation, it is important to use a proper underlay with a compression strength of at least 220 kPa. Additionally, floating installations require expansion joints between rooms, which should be covered with T-moldings. Glued installation ensures a quieter walking sound. With glued installation, there is no need for expansion joints between rooms, allowing for a seamless transition both visually and technically. Gluing also results in lower thermal resistance, ensuring faster heat transfer, providing warmth exactly when needed.